Hyperion anti-theft chip lock

11/08/2017 406 đã xem

The HYPERION motorcycle anti-theft device consists of two parts: a control box mounted in the vehicle and an identification card kept by the person.

The device only allows the vehicle to operate when the vehicle owner carries the card and stands 10m away from the vehicle, the protection system and alarm automatically turn on when the vehicle is illegally unlocked, the user just needs to keep the card in his person without needing to any other action.

Hyperion anti-theft chip lock

Price: 1,250,000 VND/set (12 months warranty )

High security, not affected by magnetic fields and electrical pulses.

- Can be used for most motorcycles, easy to install.

- The device does not work when it is turned off, so it absolutely does not drain the battery

- IP67 waterproof standard, does not affect when washing the car or going in the rain.

- Use 12V 120 dB siren..

- Using genuine parts, 12 month replacement warranty..

science-chong-trom-hyperion

The Hyperion anti-theft lock set includes 1 device installed in the vehicle and 2 identification chips

-The system will sound the siren after 9 seconds and turn off the car engine after 12 seconds if the car is running but no identification tag is found.

-Effective prevention in cases of CAR REAR SCENE. Should keep the card in person (do not hang with the key) to be able to best prevent car theft. Khoa-chong-trom-hyperion-gan-xe-sh

Hyperion anti-theft lock for car mount Sh VN

Instructions for connecting HYPERION anti-theft for motorcycles with 2-contact locks (Yamaha, Honda vision, Airblade2010...):

Identify two motorcycle lock wires:

+ Battery source: 12V standing
+ Power behind the lock: 12V when unlocking, no voltage when turning off the lock
Disconnect the power cord behind the lock into 2 ends: End A connects to the lock - End B enters the machine

B1.Nối dây nguồn dương Hyperion (Dây đỏ) vào đầu A (ổ khóa).

B2.Nối dây Relay hyperion(dây Trắng) vào đầu A (ổ khóa).

B3.Nối dây thường đóng hyperion(dây Xanh lá) vào đầu B (vào máy). (dây Nâu) : không dùng.

B4.Nối 2 dây Xi nhan hyperion(dây Vàng) vào đèn Xi nhan.

B5.Gắn còi hú 12V 120dB kèm theo thiết bị.

B6.Nối dây nguồn âm hyperion(dây đen) vào nguồn âm Acquy.

Gắn Pin cho thẻ,tiến hành đồng bộ, bật chìa khóa kiểm tra trạng thái led : Led chớp đều chu kỳ 1 giây - thiết bị hoạt động ổn định.

science-chong-trom-hyperion-vision-2014-1