Honda MSX with a good height in the current clutches. However, many brothers have a "modest" height just enough to support their feet on this car. However, to be able to support the foot more firmly. Hoang Tri Shop tells you how to limit the MSX chassis with genuine Racing Boy forks that will help lower the height of the chassis significantly!
Refer to the service immediately: Osaki gold disc slug for MSX 125
To make the height of the rear saddle lower, the shop has a solution for you that is to replace the zin fork of the Honda MSX with a different fork model with a lower height than the zin fork and especially to ensure safety. for customers when the rear saddle becomes lower (lowering the ground). The following factors need to be ensured:
- The fork must be firm, with good force resistance
- Make sure not to have too low an impact when traveling on bumpy roads
- Make sure the load of the fork is enough to carry 2 people
- The final criterion is the aesthetics of the car when equipped with new forks.
For the Honda MSX series, there are many rear forks suitable for the above criteria with different brands such as: Racing Boy, YSS, Ohlins,... Depending on the purpose of lowering the chassis as well as the height requirements After lowering, you can choose different fork lines to suit some of you who love and love MSX cars, but with a modest height, you can't control this pet driver.
In this article, Hoang Tri Racing Shop introduces to customers genuine Racing Boy fork models that can help your car lower the chassis safely and beautifully. Completely conform to the safety and beauty criteria above.
MSX 125 fork height specifications: 245mm (you will find fork lines with a lower height of 245mm to help the driver lower the chassis)
We invite you to see more pictures of the completed Racing Boy forks for MSX cars to help lower the car's chassis. If you like the fork model, you just need to save the picture and send it to the shop's sales consulting channels or visit Hoang Tri Shop directly for more advice on the fork you have chosen.
Close-up of Racing Boy S2 gold fork mounted on Honda MSX
Black color of fork with luxurious, classy yellow ti
Help your car lower the chassis safely and effectively
The height of the fork is 20mm lower than the height of the zin fork
Customers also equipped with a set of yellow Osaki plate slugs
The whole chassis becomes lower when using Racing Boy S2 . forks
Now you can enjoy and enjoy with your pet in a safe and appropriate way